CT-MTP14400 (144-way mixed interpolation stitching matrix)

MTP series seamless hybrid card splicing matrix is a flexible configuration of splicing and seamless matrix signal switcher. Using high-performance FPGA pure hardware core and modular plug-in card design, perfect Support CVBS, SVIDEO, YPbPr, VGA, DVI, HDMI, DP, SDI, HDBaseT twisted pair, optical fiber, KVM, IP codec various high-definition digital / analog signal switching processing, and support Bidirectional RS-232, bidirectional IR signal distribution switching function. The stitching function is to divide a complete image signal into multiple signals and assign them to multiple display units to form a large display at the same time. Screen to display dynamic pictures. Provide a one-stop solution for various video and control signal distribution switching processes in various industries, which can be widely used in radio and television engineering, multimedia conference halls, The screen displays engineering, television teaching, intelligent traffic management center, command and control center and other places.

description


Product system diagram


144-channel hybrid seamless matrix processor        CT-MTP14400

Number of   input cards / input channels

36/144

Number of   connectable output cards / output channels

36/144

Input card type

CVBS, S-VIDEO, YPbPr, VGA, DVI, HDMI,   DP, SDI, HDBaseT network port, Fiber optic fiber, IP (H.264 / H.265)

Output card   type:

Seamless output: CVBS, S-VIDEO, YPbPr,   VGA, DVI, HDMI, DP, SDI, HDBaseT network port, Fiber optic fiber, IP (H.264 /   H.265), visualization board

Splicing output: DVI, HDMI, HDBaseT   network port, Fiber optic fiber

Interface bandwidth:

20Gbps

Serial control

Serial control interface:

RS-232, 9-pin female D-type connector   and 9-pin male D-type interface

Baud rate and protocol:

Baud rate: 9600, data bits: 8 bits,   stop bits: 1, no parity bit

Serial control port   structure:

9-pin female D-type connector: 2 = TX,   3 = RX, 5 = GND

9-pin male D-type connector:

3 = TX,2 = RX,5 =   GND

Ethernet control

Ethernet control interface:

RJ-45 female interface

Ethernet control protocol:

TCP/IP

Ethernet control rate:

Adaptive 10M / 100M, full duplex or   half duplex

specification

System working power:

100VAC ~ 240VAC, 50/60 Hz,   international adaptive power supply

Storage and working   temperature:

0~ +50°

Storage and working humidity:

20% ~70%

Chassis size:

24U

Product weight (excluding any   boards):

80Kg

No-load power consumption   (excluding any board):

70W

Size (mm):

483Lx400Wx1043H

MTBF:

30,000 hours

Warranty:

1 year free warranty and lifetime   maintenance